Frequently Asked Questions

Why is my hot water on, but not my cold water?

There are a few potential reasons why your hot water is on, but your cold water is not. One possibility is that you have a leaky tap. Another possibility is that there is something blocking the flow of cold water, such as a build-up of sediment in your pipes. If this is the case, then you will need to call a plumber to clear the blockage.

What happens when a tankless water heater fails?

A tankless water heater is less likely to fail than a traditional water heater. However, when it does, the symptoms are normally minor to moderate leaks near the base of the unit (the hot water faucet). If you have a tankless water heater that has failed, then you will need to call a plumber to have it repaired or replaced.

What is the best technique for eliminating clogged drains?

There is no definitive technique for eliminating clogged drains. However, there are a few methods that are often successful. One popular method is to pour a pot of boiling water down the drain. Another method is to use a plunger. If these methods do not work, then you may need to call a plumber to clear the blockage.

What causes a dripping faucet?

A dripping faucet is caused by either a very slow drip, or by constant dripping. It can be difficult to determine the cause of the problem because water drips slowly over time, thus making it hard to notice. The most common causes include an old washer that needs to be replaced; sediment inside the pipes; or worn-out threads on the faucet. If you have a dripping faucet, then you will need to call a plumber to have it repaired.

What should you do if your garbage disposal is not working?

If your garbage disposal is not working, then you will need to call a plumber. However, there are a few things that you can try before calling a plumber. If the unit is still under warranty, then the first thing you should do is contact the manufacturer for troubleshooting information and potential repairs. If it is outside of its warranty, then you may need to remove the unit and inspect it for any obvious problems. If you find a problem, such as a broken disposer, then you can replace it yourself; otherwise, you will need to call a plumber.

What do you do if a plunger fails to unclog your toilet?

If a plunger fails to unclog your toilet, then you will need to call a plumber. However, there are a few things that you can try before calling a plumber. One popular method is to pour a pot of boiling water down the drain. Another method is to use a plunger. If these methods do not work, then you will need to have the blockage removed by a plumber.

Do sump pumps require servicing?

Sump pumps require regular servicing. If you have a sump pump, then it is likely that you will need to call a plumber at least once per year to check the operation of your unit and ensure that it is in working condition.

These are just a few of the most common questions that Arlington Heights residents ask about their plumbing systems. If you have any other questions, please do not hesitate to contact us at S & J Plumbing.